DAVID EDUARDO ROJAS JARA – Académico UdeC

Failure analysis of a 2205 duplex stainless steel tube affected by localized corrosion in a black liquor heat exchanger

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING 2026 ARTÍCULO AUTOR

Improving visual corrosion measurement accuracy via spectral-structural distribution alignment in deep neural networks

MEASUREMENT SCIENCE AND TECHNOLOGY 2026 ARTÍCULO WOS - SCOPUS AUTOR

Low-cost austenitic complex concentrated alloy with deformation-induced plasticity and nanoprecipitate as a strategy to enhance energy absorption at cryogenic temperature: Computational modeling and experimental validation

JOURNAL OF ALLOYS AND COMPOUNDS 2026 ARTÍCULO WOS - SCOPUS AUTOR

Unraveling the synergistic influence of Nb, V, and Ce on corrosion and high temperature performance of austenitic alloys

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 2025 ARTÍCULO WOS - SCOPUS AUTOR

Advanced zinc-polymer composites for marine corrosion protection and self-healing

NPJ MATERIALS DEGRADATION 2025 REVIEW WOS - SCOPUS AUTOR

Sigma Phase Stabilization by Nb Doping in a New High-Entropy Alloy in the FeCrMnNiCu System: A Study of Phase Prediction and Nanomechanical Response

METALS 2024 ARTÍCULO WOS - SCOPUS AUTOR

Next-Gen Hybrid Materials: Epoxy Matrices Enhanced by Covalently Anchored Alkylsilane-Nanoparticle Complexes

SIN REVISTA 2024 CAPÍTULO DE LIBRO AUTOR

Multi-Species Biofilm Interactions and Their Impact on the Biocorrosion of Copper-Coated CoCr Alloys in Dental Application

COATINGS 2024 ARTÍCULO WOS - SCOPUS AUTOR

New Sustainable Intumescent Coating Based on Polyphenols Obtained from Wood Industry Waste

COATINGS 2024 ARTÍCULO WOS - SCOPUS AUTOR

Influence of martensite and grain size on the mechanical behavior of austenitic Fe–C–Mn–Ni–Al medium Mn steels with TWIP mechanism under uniaxial tension/compression and micromechanical creep

MATERIALS CHEMISTRY AND PHYSICS 2024 ARTÍCULO WOS - SCOPUS AUTOR

Contact antibacterial and biocompatible polymeric, composite with copper zeolite filler and copper oxide, nanoparticles: A step towards new raw materials for the biomedical industry

POLYMER 2024 ARTÍCULO WOS - SCOPUS AUTOR

Evaluation in Real Conditions of New Anticorrosive Formulations Based on Polyphenols from Natural Sources and Encapsulated Nanoparticles

COATINGS 2023 ARTÍCULO WOS - SCOPUS AUTOR

Characterization of Nb-Si-doped low-carbon steel treated by quenching and partitioning: Thermic treatment in two stages supported by computational thermodynamical simulation and controlled sample dimensions

MATERIALS TODAY COMMUNICATIONS 2023 ARTÍCULO WOS - SCOPUS AUTOR

Design of Fe36.29Cr28.9Ni26.15Cu4.17Ti1.67V2.48C0.46 HEA using a new criterion based on VEC: Microstructural study and multiscale mechanical response

MATERIALS TODAY COMMUNICATIONS 2023 ARTÍCULO WOS - SCOPUS AUTOR

Effect of solution annealing temperature on the localised corrosion behaviour of a modified super austenitic steel produced in an open-air atmosphere

MATERIALS CHEMISTRY AND PHYSICS 2023 ARTÍCULO WOS - SCOPUS AUTOR

Supervised machine learning-based multi-class phase prediction in high-entropy alloys using robust databases

JOURNAL OF ALLOYS AND COMPOUNDS 2023 ARTÍCULO WOS - SCOPUS AUTOR

Exploring the Impact of Cooling Rate on Microstructural Features, Mechanical Properties, and Corrosion Resistance of a Novel Nb-Stabilized Super Duplex Stainless Steel in Shielded Metal Arc Welding

CRYSTALS 2023 ARTÍCULO WOS - SCOPUS AUTOR

Production of Nb-doped super duplex stainless steel based on recycled material: A study of the microstructural characterization, corrosion, and mechanical behavior

MATERIALS CHEMISTRY AND PHYSICS 2023 ARTÍCULO WOS - SCOPUS AUTOR

Tribological characterization of TiVN trilayer coatings synthesized by sputtering for biomedical applications

CERAMICS INTERNATIONAL 2023 ARTÍCULO WOS - SCOPUS AUTOR

Laves phase formation in Fe-based alloys from strengthening particle to self-healing agent: a review

MATERIALS RESEARCH EXPRESS 2023 REVIEW WOS - SCOPUS AUTOR

Hybrid Materials Based on Nanoparticles Functionalized with Alkylsilanes Covalently Anchored to Epoxy Matrices

POLYMERS 2022 ARTÍCULO WOS - SCOPUS AUTOR

Eco-Friendly Fire-Resistant Coatings Containing Dihydrogen Ammonium Phosphate Microcapsules and Tannins

COATINGS 2021 ARTÍCULO WOS - SCOPUS AUTOR

Condensed tannin resins extracted from Pinus radiata bark as a support matrix in carbon nanofiber-reinforced polymers

POLYMER BULLETIN 2021 ARTÍCULO WOS - SCOPUS AUTOR

A Dual Active-Passive Coating with Intumescent and Fire-Retardant Properties Based on High Molecular Weight Tannins

COATINGS 2021 ARTÍCULO WOS - SCOPUS AUTOR

Eco-Friendly Coatings Containing Microcapsules with Fire-Resistant Properties

SIN REVISTA 2021 CAPÍTULO DE LIBRO AUTOR

Improvement of thermomechanical properties of composite based on hydroxyapatite functionalized with alkylsilanes in epoxy matrix

CERAMICS INTERNATIONAL 2020 ARTÍCULO WOS - SCOPUS AUTOR

Effect of Boron in the Coarsening Rate of Chromium-Rich Carbides in 9%-12% Chromium Martensitic Creep-Resistant Steel: Experiment and Modeling at 650 degrees C

METALS AND MATERIALS INTERNATIONAL 2020 ARTÍCULO WOS - SCOPUS AUTOR

Study of anticorrosive coatings based on high and low molecular weight polyphenols extracted from the pine radiata bark

PROGRESS IN ORGANIC COATINGS 2019 ARTÍCULO WOS - SCOPUS COAUTOR

Laves Phase in a 12% Cr Martensitic/Ferritic Steel: Evolution and Characterization of Nanoparticles at 650 degrees C

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY 2019 ARTÍCULO WOS - SCOPUS COAUTOR

Comparative Study of the Antimicrobial Effect of Nanocomposites and Composite Based on Poly(butylene adipate-co-terephthalate) Using Cu and Cu/Cu2O Nanoparticles and CuSO4

NANOSCALE RESEARCH LETTERS 2019 ARTÍCULO WOS - SCOPUS AUTOR

Influence of the concentration of copper nanoparticles on the thermo-mechanical and antibacterial properties of nanocomposites based on poly(butylene adipate-co-terephthalate)

POLYMER COMPOSITES 2019 ARTÍCULO WOS - SCOPUS AUTOR

Formulation of a multifunctional coating based on polyphenols extracted from the Pine radiata bark and functionalized zinc oxide nanoparticles: Evaluation of hydrophobic and anticorrosive properties

PROGRESS IN ORGANIC COATINGS 2019 ARTÍCULO WOS - SCOPUS AUTOR

Computational modeling of the effect of B and W in the phase transformation of M23C6 carbides in 9 to 12 pct Cr martensitic/ferritic steels

MATERIALS RESEARCH EXPRESS 2019 ARTÍCULO WOS - SCOPUS AUTOR

Synthesis of Copper Nanowires and Their Antimicrobial Activity on Strains Isolated Persistent Endodontic Infections

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY 2018 ARTÍCULO WOS - SCOPUS AUTOR

Investigation of Ta-MX/Z-Phase and Laves Phase as Precipitation Hardening particles in a 12 Pct Cr Heat-Resistant Steel

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIAL 2018 ARTÍCULO WOS - SCOPUS AUTOR

Solvothermal Synthesis and Photocatalytic Activity of BiOBr Microspheres with Hierarchical Morphologies

ACTA CHIMICA SLOVENICA 2018 ARTÍCULO WOS - SCOPUS COAUTOR

Design and Characterization of Super Austenitic Stainless Steel Stabilized with Niobium Produced by Induction Melting at Open Atmosphere

STEEL RESEARCH INTERNATIONAL 2018 ARTÍCULO WOS - SCOPUS AUTOR

Estimation of the surface interaction mechanism of ZnO nanoparticles modified with organosilane groups by Raman spectroscopy

CERAMICS INTERNATIONAL 2017 ARTÍCULO WOS - SCOPUS COAUTOR

Precipitation kinetics in a 10.5%Cr heat resistant steel: Experimental results and simulation by TC-PRISMA/DICTRA

MATERIALS CHEMISTRY AND PHYSICS 2017 ARTÍCULO WOS - SCOPUS AUTOR

Rapid synthesis and photocatalytic activity of ZnO nanowires obtained through microwave-assisted thermal decomposition

CERAMICS INTERNATIONAL 2016 ARTÍCULO WOS - SCOPUS COAUTOR

Effect of ZnO nanoparticles obtained by arc discharge on thermo-mechanical properties of matrix thermoset nanocomposites

JOURNAL OF APPLIED POLYMER SCIENCE 2016 ARTÍCULO WOS - SCOPUS COAUTOR

Effect of electroceramic particles on damping behaviour of aluminium hybrid composites produced by ultrasonic cavitation and mechanical stirring

MATERIALS & DESIGN 2015 ARTÍCULO WOS - SCOPUS AUTOR

CONAMET/SAM 2015. 15° Congreso Internacional de Metalurgías y Materiales: Memorias

SIN REVISTA 2015 LIBRO AUTOR

Study of nucleation, growth and coarsening of precipitates in a novel 9%Cr heat resistant steel: Experimental and modeling

MATERIALS CHEMISTRY AND PHYSICS 2014 ARTÍCULO WOS - SCOPUS COAUTOR

The role of Laves phase on microstructure evolution and creep strength of novel 9%Cr heat resistant steels

INTERMETALLICS 2013 ARTÍCULO WOS - SCOPUS COAUTOR

The role of Laves phase on microstructure evolution and creep strength of novel 9%Cr heat resistant steels

INTERMETALLICS 2012 ARTÍCULO WOS - SCOPUS COAUTOR

9% Cr Heat Resistant Steels: Alloy Design, Microstructure Evolution and Creep Response at 650ºC

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 2011 ARTÍCULO WOS - SCOPUS COAUTOR

Dielectric and relaxor studies of Ba modified PLZT (1.2/55/45) system

FERROELECTRICS 2007 ARTÍCULO WOS - SCOPUS AUTOR

Dielectric and relaxor studies of La modified PMN-PZT system

FERROELECTRICS 2006 ARTÍCULO WOS - SCOPUS AUTOR